Sleep Timer Setup; Key Lock Setup - Zenith R40W46 Installation And Operating Manual

Features

Sleep Timer Setup

You don't have to remember to switch the TV to standby mode before
you go to sleep. The Sleep Timer automatically turns the TV off after
the preset sleep time expires.
Use the sleep button to select the desired sleep time.
Each time you press this button, preset sleep time settings are
displayed one by one as shown below. The Sleep Timer begins to
count down from the number of minutes selected.
---
Notes
• After a few seconds, the desired sleep time setting will disappear and
the TV turn-off function will operate automatically.
• To view the remaining sleep time, press the sleep button once and
the remaining sleep time will be displayed.
• To cancel the Sleep Timer, select the --- setting with sleep button.

Key Lock Setup

The TV can be set up so that it can only be operated by the remote
control. This feature can be used to prevent unauthorized viewing.
1. Press the menu button and then use
special menu.
2. Press the G and then use
3. Press the G and then
4. Press the exit button to return to TV viewing.
Notes
• With key lock set to on, the display
if any button on the front panel is pressed while viewing the TV.
• This TV is programmed to remember which option it was last set to
when you switch the TV on from standby mode.
D /
E
D
/ E button to select
D
/ E button to select
appears on the screen
button to select the
.
or .
14
---
Special
Language { {
CH.
{ {
Main input
{ {
PIP Input
Key lock { { On
Captions { { Off Off
Caption/Text { {
{ {
ARC
Auto move { {
+ + Move } } Back
SSSKey lock