Color Convergence Adjustments - Zenith R40W46F Installation And Operating Manual

Color Convergence Adjustments

Use this function to adjust the R-G-B color convergence while a stable
signal is present. When the TV is first installed or if it is relocated, the
picture may be unstable with three color ghosts (red, green, blue). This
problem can be solved by adjusting the color convergence.
1. Press the menu button and then use
Picture menu.
2. Press the G and then use
3. Press the G and then use
convergence) or (9 point convergence) .
If the display is not white and shows three color ghosts, the color
convergence needs to be adjusted. If the
convergence is adjusted properly.
G
4. Press the and then press the tv/video button.
The display button is selected in red or blue.
5. Only selecting : Use the number (1~9) button to select the
position your want to adjust the convergence for.
F G
6. Use the D / button to superimpose the
E
/ /
blue) over the green . It will be changed to yellow or cyan.
7. When both red and blue
green, the display changes to white.
8. Press the exit button to return to TV viewing.
Note: If the picture needs to be adjusted more
convergence) adjustment, you can adjust the
convergence) for the position you want to adjust.
D / button to select the
E
D / button to select
E
D / button to select
E
display is white, color
display is correctly superimposed over
(all point
19
Picture
EZ Video
CH.
DRP
Cinema
.
VM
ACC
(all point
Contrast
Brightness
Color
Sharpness
Tint
Convergence { {
+ + Move {Next+} } Back
display (red or
TV/
(9 point
{ {
{ {
{ {
{ {
{ {
{ {
{ {
{ {
{ {
1 {
1
{ {
9 {
VIDEO ENTER MENU