Commissioning - Siemens RS232 Manual

Assembly and Commissioning

4.3 Commissioning

4.3

Commissioning

Fasten the device to a symmetric DIN rail as per EN 50022.
²
Check whether the operational data match the values on the name plate.
²
Do not make any changes to the device.
²
Carefully screw the fiber-optic connectors (hand-tight).
²
Insert and screw the RS232 connector in position.
²
Attach the connectors of the auxiliary voltage to the terminal N/- and L/+.
²
Connect the life contact to the terminals.
²
Switch on the auxiliary power supply.
²
After connecting the auxiliary power supply, the green LED Power On lights up and the device is ready for
operation.
30 Accessories, RS232 Optical Fiber Converter 7XV5652-0CA00, Manual
C53000-G9050-C606-1, Edition 03.2020