Operating Sequence; Washing 6 Kg Of White Cotton At 95°C; Load The Laundry; Measure Out The Detergent And The Fabric Softener - Zanussi ZWF 1450W Instruction Booklet

Operating Sequence

Before the first wash, we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 6 KG OF WHITE COTTON AT 95°C
Suppose you have 6 kg of heavy soiled laundry to wash.
It is white cotton and is suitable for high temperature
washing.

1. Load the laundry

Open the door by carefully pulling the door handle
outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it
into the main wash compartment
carry out the prewash phase,
pour it into the compartment marked
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
"MAX" mark in the drawer). Close the drawer gently.

3. Switch the machine on

Turn the selector dial to the desired programme to
switch the appliance on.
To switch the appliance off turn it to OFF.
Switching the machine on for
the first time.
LANGUAGE
When switching on the appliance for the first time you
must set the language in which you want the indicators
in the display to appear.
Important!
If the display is not showing any language, the
appliance has already been switched on once. In such
case, go to the chapter «Change language» if you would
like to change the language setting.
Example:
1.Press the CHANGE button until the desired language
appears in the display.
and, if you wish to
.
13