Draytek Vigor 2862 Series Quick Start Manual page 6

Interface Description
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When
you see the ACT LED begins to blink rapidly than usual, release the
button. Then the router will restart with the factory default
configuration.
DSL
Connecter for accessing the Internet.
LAN P1~P4
Connecters for local network devices.
P5/WAN2
Connecter for local network devices or modem for accessing
Internet.
USB1~2
Connecter for a USB device (for 3G/4G USB Modem or printer or
thermometer).
PWR Connecter for a power adapter.
ON/OFF Power Switch.
3