ResMed Pixi User Manual page 24

Cushion check
Cushion check steps
1–2. Ensure the cushion is not creased or folded or caught inside the sockets of the
mask frame.
3. The Pixi cushion is designed to sit mid-bridge. Ensure that the mask does not
block the nose or mouth at any time.
Removal
Removal steps
1–2. Gently hold the mask against the child's face. Unhook the quick release clip from
the lower headgear arm by pulling forward and away from the arm.
3–4. Keep holding the mask and remove the headgear by pulling up and over the head
towards the face.
Emergency removal
In the event of an emergency, remove the mask by placing your finger under the lower
headgear strap and firmly pulling it away from the child – this will activate the quick
release clip. Do not use this removal method under normal circumstances.
Disassembly
Disassembly steps
1. Detach the headgear from the mask frame by unlatching each of the lower
headgear arms from the frame nodes.
2. Remove the combined elbow and air tubing from the mask.
3. Remove the plug from the cushion.
4–5. Remove the cushion from the frame by gently pushing it through from the front
of the frame and pulling it away from the rear of the mask frame.
WARNING
When disassembling the mask, always keep all accessories and components
out of the reach of small children as small parts might present a choking hazard.
Seek immediate medical attention if choking occurs or if any small part has been
swallowed.
4