Table of Contents
Advertisement
For your own safety, read instruction manual before operating the machine. Learn
the machine's application and limitations as well as the specific hazards peculiar.
Always wear approved safety glasses or a face shield when operating or observing
machinery to reduce the risk of eye injury or blindness from flying particles Everyday
eyeglasses are not approved safety glasses.
Dust created while using machinery may cause cancer, birth defects, or long-term
respiratory damage. Be aware of dust hazards associated with each workpiece
material, and always wear an approved respirator to reduce your risk.
Always wear hearing protection when operating or observing loud machinery.
Extended exposure to this noise without hearing protection can cause permanent
hearing loss.
Keep hands and clothing away from moving parts. Always tie back or cover long hair.
Wear non-slip footwear to avoid accidental slips which could cause a loss of
workpiece control.
Personal protective equipment
protective suit
Dirty or contaminated personal protective equipment can cause illness. Clean your
personal protective equipment after each use and once a week.
1.2 Intended use
The metal cutting bandsaw is designed and manufactured for use in non-explosive environments.
The metal cutting bandsaw is designed and manufactured to saw cold metal, cast material and
plastics or other material that are not hazardous to health and do not generate dust.
The metal cutting bandsaw must not be used on wood.
The pieces to be cut must be of a shape that will allow them to be securely clamped in the machine
vice and ensure that the piece does not come loose when it is being sawn.
The metal cutting bandsaw must only be installed and operated in dry and ventilated areas.
safety shoes
3
protective gloves
protective glasses
Advertisement
Table of Contents
