Making Preparations; Inserting Sd Cards - Zoom PodTrak P4 Operation Manual

Making preparations

Inserting SD cards

SD card slot
1.
With the power off, open the SD card slot cover, and insert an SD card all the way into the slot.
To remove an SD card, push it further into the slot and then pull it out.
NOTE
• Cards that conform to SDHC and SDXC specifications are supported.
• Disable write-protection on the SD card before inserting it.
• Inserting or removing an SD card while the power is on could result in data loss.
• When inserting an SD card, be sure to insert the correct end with the top side up as shown.
• If an SD card is not loaded, recording and playback are not possible.
• Before using SD cards that have just been purchased or that have been formatted on a computer, they
must be formatted by the
P4
( "Formatting SD cards" on page 49).
14
POWER switch