Getting Started; Battery Installation; Battery Notice - VTech Toot-Toot Animals Animal Boat Parents' Manual

WARNING:
All packing materials, such as tape, plastic sheets, wire ties and
tags are not part of this toy, and should be discarded for your
child's safety
NOTE:
Please keep the parent's guide as it contains important information.

GETTING STARTED

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the unit. Use screwdriver to
loosen the screw.
3. Install 3 new AAA (LR03/AM-4)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for
maximum performance).
4. Replace the battery cover and tighten
the screw to secure.

BATTERY NOTICE

• Use new alkaline batteries or fully charged NI-MH (Nickel
Metalhydride) rechargeable batteries for best performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
5