Table of Contents
Advertisement
User manual
3.7
Setting Smart card parameters
Set the required smart card parameters in the following fields:
Use constant
bitrate
The Card function radio buttons determine whether CA module scrambling functionality is to be used.
Card function
Service list
3.8
Selecting Service list – filter options
Open the drop-down list and select the the language of the audio PID
you want to descramble.
To descramble only selected audio PIDs you have to deselect the
Descramble all audio PIDs checkbox.
An additional field with a language drop-down list is displayed every
time you select a language. You can descramble as many audio PIDs
as you need.
To remove a
selection
leave the
field empty.
If the language of the audio PID you want to descramble is not displayed in the list you can enter a three letter string signifying the language
you need. Click OK to return to the Configuration window.
NOTE:
There is no limit to the number of audio PIDs that can be specified.
•
Deselect the check box if a variable bitrate is to be used. The Use constant bitrate check box is selected by
default.
•
Select the Descramble (default) button to descramble services.
•
Select the Scramble button to scramble services using the Scrambler.
•
Select the check box relating to the service(s) to be descrambled. (Scrambled services are indicated with '$'. )
•
Press the Setup button associated with the service.services using the Scrambler.
13
EN
Advertisement
Table of Contents
