Table of Contents
Advertisement
User manual
EIT information - continued
If you prefer not to use a barker channel you have the following options:
Full Actual - Full Other
Full Actual - P/F Other
Full Actual - No Other
P/F Actual - P/F Other
P/F Actual - No Other
No Actual - No Other
Shared settings:
Manual transport
stream ID
Use static NIT
version
NIT version
Enable CAT tables
In the service list area you determine the numerical output order of the digital services on the television or set-top box of the end-user.
Enable HD LCN
LCN number and
HD LCN Number
All outputs will have all EIT information
available, so all actual present/following,
actual schedule, other present/following and
other schedule EIT are sent out with all
muxes.
All outputs will have actual present/following
and actual schedule EIT information, but
only other present/following EIT information.
All outputs will have actual present/following
and actual schedule EIT information, and no
other EIT information.
All outputs will have actual present/following
EIT information and other present/following
EIT information only.
All outputs will have actual present/following
EIT information.
No EIT information is output.
Select the Manual transportstream ID if you
want to enable the Transportstream ID field
in the Configuration windows for output
modules..
By default the Use static NIT version
checkbox is deselected.
Enter the desired number in the LCN number
field to the right of each service in the
service list area.
Enter the desired number in the LCN number
field to the right of each service in the
service list area.
Select the Enable HD LCN checkbox if you
want an HD channel to take precedence over
the same channel in SD mode.
Enter LCN numbers for both the SD and HD
channels in the fields in the service list area.
NOTE:
You cannot give the same LCN
number to more services.
25
EN
Advertisement
Table of Contents
