Channel / Frequency Setting; Tv Standard Of The Output Signal - Triax CCAV 300 Assembly Instruction Manual

C
h a n n e l
In this menu, you can select the channel or frequen c y setting for the adjustment
of the RF output. The channel setting covers the range of channels C02 ...
C69 including channels S02 ... S41, the frequency setting covers the range
from 42.00 MHz to 870..00 MHz. Additionally the TV standard of the output
signal can be set.
• Press
t v
s ta n da r d
• Place the cursor under the TV standard displayed using the
• Press
"PAL I").
• Press the
/
f r e q u e n C y s e t t i n g
Bx 1A
Chan
to select channel setting "Chan" or frequency setting "Freq".
o f t h e o u t p u t
Bx 1A
Chan
to select the TV standard of the output signal ("PAL B/G" /
button.
—> The "Setting the output channel" or "Setting the output frequency" –
"OUTPUT" menu is activated.
NORM
PAL B/G
s i g n a l
NORM
PAL B/G
- 15 -
buttons.
CCAV 300