Canon imageCLASS MF4890dw Service Manual page 273

4
Disassembly/Assembly > Controller System > Removing the Main Motor (D530) > Procedure
Caution:
Ensure that the shutter open/close lever [1] can move vertically.
3)Disconnect the 2 connectors[1], and remove the motor driver PCB[2]
• 2 claws[3]
• 1 hook[4]
x2
[1]
4 Disassembly/Assembly > Controller System > Removing the Main Motor (D530) > Procedure
[1]
F-4-504
x2
[3]
[2]
[4]
F-4-505
4)Free the harness from the harness guide[A] and [B], and remove the duplex relay PCB[1]
• 1 claw[2]
• 1 hook[3]
[A]
5)Free the motor harness[1] from the harness guide[C].
6)Remove the motor guide[2]
• 1 screw[3]
• 1 hook[4]
[3]
[1]
4-197
[2] [1] [3]
[B]
F-4-506
[C]
[4]
[2]
F-4-507
4-197