Siemens SIMATIC SIMOSTEP 1FL3041 Functional Description page 5

Safety information
!
!
!
Qualified personnel
Intended use
!
Trademarks
This manual contains safety texts which you should always observe for
your personal safety and to avoid damage. These texts are identified and
emphasized by a symbol and a heading which varies according to the
degree of danger:
Danger
means that death, serious injury or severe damage will result if proper
precautions are not taken.
Warning
means that death, serious injury or severe damage may result if proper
precautions are not taken.
Caution
means that minor injury or damage may result if proper precautions are
not taken.
Note
is used to give special emphasis to important information on the product,
handling the product or the relevant part of the documentation.
Start-up and operation of the unit shall only be carried out by qualified
personnel. Qualified personnel in the sense of the safety information in
this manual are those persons who are authorized for setting up, earthing
and tagging equipment, systems and circuits according to established
safety practices.
The following should be noted:
Warning
This equipment may only be used for the individual applications specified
in the catalog and in this documentation and only in conjunction with
Siemens approved or recommended third-party equipment and
components.
Adequate transport, storage, installation and mounting as well as careful
use and thorough maintenance are prerequisites for safe and reliable
operation of the product.
SIMATIC® and SINEC® are registered trademarks of the SIEMENS AG.
I