Siemens SIMATIC SIMOSTEP 1FL3041 Functional Description page 4

SINUMERIK® Documentation
Printing history
Brief details of this editor and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status code in "Remarks" column:
A .... New documentation
B .... Unrevised reprint with new order No.
C .... Revised edition with new status
If factual changes have been made on the page since the last editon, this is
indicated by a new edition coding in the header on that page.
Edition Order No.
01.96 6SN1197-0AA70-0YP0
01.97 6SN1197-0AA70-0YP1
01.97 6SN1197-0AA70-0YP2
11.98 6SN1197-0AA70-0YP3
01.01 6SN1197-0AA70-0YP4
02.05 6SN1197-0AA70-0YP5
This documentation was created using WinWord V 7.0,
Designer V 7 and Doc-To-Help V 1.6.
The reproduction, transmission or use of this document or its contents is not
permitted without express written authority. Offanders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility modal or
design, are reserved.
© Siemens AG 1998. All Rights Reserved.
Order no. 6SN1197-0AA70-0YP5
Printed in the Federal Republic of Germany
Remarks
A
C
C
C
C
C
Other functions not described in this documentation might be executable in the
control. This does not, however, represent an obligation to supply such functions
with a new control or when servicing.
The contents of this publication has been verified for correspondence with the
hardware and software described. Nevertheless there may still be some
deviations. The information contained herein is verified on a regular basis, and
any corrections will be included in the subsequent editions. We should appreciate
any suggestions for improvement.
Subject to technical modifications.
Siemens AG