Huawei 2288H V5 User Manual page 126

2288H V5 Server
User Guide
Step 4 Press the ejector release button on the drive. See (1) in
The ejector lever automatically ejects.
Figure 5-6 Removing a drive
Step 5 Holding onto the ejector lever, pull out the drive about 3 cm (1.18 in.). See (2) in
Wait for at least 30 seconds until the drive stops working and remove it. See (3) in
Step 6 Place the removed drive into an ESD bag.
Issue 04 (2018-09-04)
Figure 5-5 Opening the handles of the built-in drive module
NOTE
If a drive is frequently removed and installed in an interval shorter than 30 seconds, there are risks that
the drive cannot be identified.
Copyright © Huawei Technologies Co., Ltd.
5 Optional Part Installation
Figure 5-6.
Figure 5-6.
Figure 5-6.
117