Powering Off The Server - Huawei 2288H V5 User Manual

2288H V5 Server
User Guide
l

3.2 Powering Off the Server

Power off the server using one of the following methods:
l
l
l
Issue 04 (2018-09-04)
If the PSUs are properly installed and connected to the external power supply and the
server is in the standby state (the power indicator is steady yellow), power on the server
as follows:
– Press the power button on the front panel to power on the server. For details about
the power button position, see
– Power on the server using the iBMC WebUI.
i. Log in to the iBMC WebUI. For details, see
WebUI.
ii. Choose Power > Power Control.
The Power Control page is displayed.
iii. Click Power On. In the displayed dialog box, click Yes to power on the server.
– Power on the server using the Remote Virtual Console.
i. Log in to the Remote Virtual Console. For details, see
Remote Virtual
ii. On the KVM screen, click
iii. Choose Power On.
A dialog box is displayed.
iv. Click Yes to power on the server.
– Power on the server using the iBMC CLI.
i. Log in to the iBMC CLI. For details, see
ii. On the iBMC CLI, run the ipmcset -d powerstate -v 1 command.
iii. Enter y or Y to power on the server.
NOTE
l Services and programs running on the server will be interrupted when it is powered off. Before
powering off the server, ensure that all services and programs have been stopped or switched to
other servers.
l The power-off described in this section the server to the standby state (the power indicator is steady
yellow).
l After the server is powered off forcibly, wait for more than 10s to ensure that the server is powered
off completely. Then you can power it on again.
Use cables to connect the server to a video display, keyboard, and mouse, and shut down
the server OS to power off the server.
Press and hold down the power button on the front panel until the server is powered off.
For details about the power button position, see
Buttons.
Power off the server using the iBMC WebUI.
a. Log in to the iBMC WebUI. For details, see
WebUI.
b. Choose Power > Power Control.
Copyright © Huawei Technologies Co., Ltd.
2.2 Front Panel Indicators and
Console.
or on the menu bar.
2.2 Front Panel Indicators and
4.6.4 Logging In to the iBMC
3 Basic Operations
Buttons.
4.6.4 Logging In to the iBMC
14.2 Logging In to the
14.3 Logging In to the iBMC CLI.
41