Method For Downloading Data From Connector For Download - Komatsu HD325-8 Operation & Maintenance Manual

HANDLING PAYLOAD METER
METHOD FOR DOWNLOADING DATA FROM CONNECTOR FOR DOWN-
LOAD
METHOD FOR DOWNLOADING DATA FROM CONNECTOR FOR DOWNLOAD IN
CAB
• When handling the cables, be careful not to damage them or pull them by force.
• Do not leave the connectors disconnected.
• Be careful to prevent dirt from entering the connector portion.
• Do not let any metal objects touch the connector portion.
• Download the data by means of serial communication (RS232C).
For computers without an RS232C port, it may be possible to use a third party USB-RS232 conversion
adapter.
However, this does not guarantee the operation.
The download software supports COM1 and COM2, so check which port it can be connected to.
• Download the recorded data to a personal computer installed with special software (optional).
• When you need to correct the date and time in the downloaded data, consult your Komatsu distributor.
• There is some error in the directory where the data is downloaded by the special software, there may be a
mistake in the setting for the machine.
In such case, consult your Komatsu distributor.
1.
Remove the cap.
2.
Connect the download cable attached to the special soft-
ware to the download connector.
3.
Connect the other end of the download cable to RS232C
port of the personal computer.
4.
Turn the starting switch to ON position.
5.
Start up the personal computer, and use the special soft-
ware to download the data.
6.
After finishing downloading, restore the cap.
METHOD FOR USING DOWNLOAD SOFTWARE
Start up the personal computer and use the special software to
download the data.
For details of installing the software, see the instruction manual
of the download software.
When the installation is completed, the icon shown in the figure
is created.
6-6
k k
WARNING
ATTACHMENTS AND OPTIONS