Ethernet Switches - ABB IRC5 Applications Manual

2 Hardware overview

2.2 Ethernet switches

2.2 Ethernet switches
Prerequisites
It is recommended that switches used in the I/O network support Quality of Service
(QoS).
I/O devices mark their packets with a priority value. The priority value is used in
order to get better I/O data throughput and shorter delays on the network.
Switches and routers are then able to differentiate the device's critical from the
other non-critical traffic. To do this, the switches and routers must support Quality
of Service.
26
© Copyright 2015-2018 ABB. All rights reserved.
Application manual - PROFINET Controller/Device
3HAC050969-001 Revision: G