Safety Cut-Out - Zanussi ZKT631DX Installation And Operating Instructions Manual

Safety cut-out

Cooking surface
• If after switching on the cooking surface, a heat setting is not set for a
cooking zone within approx. 10 seconds, the cooking surface automati-
cally switches itself off.
• If one or more sensor fields are covered by objects (a pan, cloths, etc.) for
longer than approx. 10 seconds, a signal sounds and the cooking surface
switches off automatically.
• If all cooking zones are switched off, the cooking surface automatically
switches itself off after approx. 10 seconds.
Control panel
• When the appliance is switched off, if one or more of the sensor fields on
the control panel are covered for more that 10 seconds, an acoustic signal
sounds. The acoustic signal switches itself off automatically when the
sensor fields are no longer covered.
Induction cooking zones
• In the event of overheating (e.g. when a pan boils dry) the cooking zone
automatically switches itself off.
the cooking zone must be set to 0 and allowed to cool down.
• If cookware that is not suitable is used,
minutes the display for the cooking zone switches itself off.
all cooking zones
• If one of the cooking zones is not switched off after a certain time, or if the
heat setting is not modified, the relevant cooking zone switches off auto-
matically.
be set to 0.
Heat setting
v, 1 - 2
3 - 4
5
6 - 9
is displayed. Before being used again, the cooking zone must
Switches off after
6 hours
5 hours
4 hours
1.5 hours
is displayed. Before being used again,
flashes in the display and after 2
17