Technical Data - Zanussi ZGL62IT User Manual

Problem
The flame is blow out immediately af-
ter ignition
The gas ring burns unevenly
If there is a fault, first try to find a solution to the problem
yourself. If you cannot find a solution to the problem
yourself, speak your dealer or the local Service Force
Centre.
If you operated the appliance incorrectly, or the in-
stallation was not carried out by a registered engi-
1
MOD.
PROD.NO.
SER.NO
DATA
MODEL
1 Stick it on Guarantee Card and send this part
2 Stick it on Guarantee Card and keep this part
3 Stick it on instruction booklet
These data are necessary to help you quickly and correct-
ly. These data are available on the identification plate from
the injectors kit.
• Model description .................

Technical data

Hob dimensions
Width:
10
Possible cause
• Thermocouple is not heated suffi-
cient
• Burner crown is blocked with food
residues
2
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
MODEL
580 mm
• After lightning the flame, keep the
• Make sure that the injector is not
neer, the visit from the customer service technician or
dealer may not take place free of charge, even during the
warranty period.
Labels supplied with the accessories bag
Stick the adhesive labels as indicated below:
3
MOD.
PROD.NO.
0049 SER.NO.
• Product number (PNC) .................
• Serial Number (S.N.) .................
Use the original spare parts only. They are available at
Service Force Centre and approved spare parts shops.
Length:
Remedy
knob pushed for approximately 5
seconds.
blocked and the burner crown is
clear of food particles.
TYPE
230V-50Hz
IP20
500 mm