Sata Configuration; Network Stack Configuration; Usb Configuration - Asus J3455T-IM-A Manual

3.3.9

SATA Configuration

SATA6G_1/2
Allow you to enable/disable the SATA6G_1/2/3 port. Configuration options:
[Disabled] [Enabled]
Hot Plug
These items allow you to enable/disable SATA Hot Plug support. Configuration
options: [Disabled] [Enabled]
3.3.10

Network Stack Configuration

Network Stack
This item allows user to disable or enable the UEFI network stack. Configuration
options: [Disabled] [Enabled]
The following items appear only when you set the previous item to [Enabled].
Ipv4 PXE Support
This item allows user to disable or enable the Ipv4 PXE Boot support.
Configuration options: [Disabled] [Enabled]
Ipv6 PXE Support
This item allows user to disable or enable the Ipv6 PXE Boot support.
Configuration options: [Disabled] [Enabled]
PXE boot wait time
This item allows to set the waiting time before pressing ESC key to abort the PXE
boot.
Media detect count
This item allows to set the number of times that the presence of media will be
checked.
3.3.11

USB Configuration

U32G1_1/2/3/4
Allows you to enable or disable USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]
USB_E1234
Allows you to enable or disable USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]
3-8
J3455T-IM-A/N3350T-IM-A/N4200T-IM-A