Watchdog Timer; Apm Configuration; Ez-Flash; Miscellaneous - Asus J3455T-IM-A Manual

3.3.13

Watchdog Timer

Watchdog Support
This item allows you to enable or disable Watchdog timer. Configuration options:
[Enabled] [Disabled]
Watchdog Timer
Use the <+> and <-> keys to adjust the value or input the desired value directly.
The value ranges from 1 to 255.
3.3.14

APM Configuration

ErP Ready
Allows you to switch off some power at S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Configuration options: [Disabled] [Enabled]
Restore AC Power Loss
[S5 State]
[S0 State]
[Last State]
Power On By PCIE
This item allows you to enable or disable the Wake-on-LAN function of the onboard
LAN controller or other installed PCIe LAN cards. Configuration options: [Disabled]
[Enabled]
Power On By Ring
[Enabled]
[Disabled]
Power On By RTC
[Enabled]
[Disabled]
3.3.15

EZ-Flash

Enter Ez-Flash mode
This item allows you to run EzFlash utility. When you press <Enter>, a confirmation
message appears. Use the left/right arrow key to select between [Yes] or [No],
then press <Enter> to confirm your choice.
3.3.16

Miscellaneous

Native ASPM
This item allows you to control the Active State Power Management on SA side of
the DMI Link. Configuration options: [Disable][Enable]
3-10
The system goes into off state after an AC power loss.
The system goes into on state after an AC power loss.
The system goes into last state after an AC power loss.
Enables the Ring devices to generate a wake event.
Disables the Ring devices to generate a wake event.
When set to [Enabled], the items RTC Alarm Date(Days) and
Hour/Minute/Second are use-configurable with set values.
Disables RTC to generate a wake event.
J3455T-IM-A/N3350T-IM-A/N4200T-IM-A