Table of Contents
Advertisement
Resolution 100x31
Allows you to enable or disable extended terminal resolution.
Configuration options: [Disabled] [Enabled]
Putty KeyPad
Allows you to select FunctionKey and KeyPad on Putty.
Configuration options: [VT100] [LINUX] [XTERMR6] [SCO] [ESCN] [VT400]
3.3.8
SATA Configuration
This item allows you to configure SATA device options settings.
SATA Controller(s)
Allows you to enables or disables the onboard SATA device.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set SATA Controller(s) to [Enabled].
SATA Mode Selection
Allows you to determine how SATA controller(s) operate. Configuration options:
[AHCI]
[AHCI]
Set to [AHCI] when you want the SATA hard disk drives to use the AHCI
(Advanced Host Controller Interface). The AHCI allows the onboard
storage driver to enable advanced Serial ATA features that increases
storage performance on random workloads by allowing the drive to
internally optimize the order of commands.
The following items appear only when you set SATA Mode Selection to [Intel
RST Premium With Intel Optane System Acceleration].
Sata Interrupt Selection
Allows you to select which interrupt will be available to the operating system.
This option only takes effect if SATA controller is in RAID mode.
Configuration options: [Msix] [Msi] [Legacy]
RAID Device ID
Allows you to choose RAID device ID.
Configuration options: [Client] [Alternate]
SATA6G_1/2/3/4
Allow you to enable/disable the SATA6G_1/2/3/4 port. Configuration options:
[Disabled] [Enabled]
Chapter 3: BIOS setup
3-9
Advertisement
Table of Contents
