Onboard Devices Configuration - Asus J3455T-IM-A Manual

3.3.12

Onboard Devices Configuration

HD-Audio
[Enable] Enables the HD Audio Device.
[Disable] Disables the HD Audio Device.
VerbTable Select
This item allows you to select the installed VerbTable that is required to reset
system after changing settings. Configuration options: [87F0 Line In] [87EF Line
Out]
PCIE SATA Switch
[mPCIe] When set to mPCIe, SATA cannot be used.
[mSATA] When set to mSATA, SATA can be used.
PCIe/M.2 Switch
Allow you to select the slot mode between M.2 and PCIe. Configuration options:
[AUTO] [M.2]
M.2 (WiFi)_BT Controller
Allow you to enable or disable M.2 (WiFi) USB port, which is also known as BT
Controller of M.2 (WiFi) device. Once set to [Disabled], any USB devices plugged
into the connector will not be detected by BIOS or OS. Configuration options:
[Enable] [Disable]
MPCIE_MSATA Controller
[Enable] Enables MPCIE_MSATA root port.
[Disable] Disables MPCIE_MSATA root port.
MPCIE_BT Controller
Allow you to enable or disable MiniPCIe USB port, which is also known as BT
Controller of MPCIe device. Once set to [Disabled], any USB devices plugged into
the connector will not be detected by BIOS or OS. Configuration options: [Enable]
[Disable]
LAN1/2 Enable/Disable
[Enabled] Enables the Intel LAN1/2 controller.
[Disabled] Disables the controller.
LAN1/2 PXE OPROM
This item allows you to enable or disable the PXE Option ROM of the LAN1/2
controller. Configuration options: [Disabled] [Enabled]
Chapter 3: BIOS setup
3-9