AT&T Genie Mini Activation Instructions

Activation & Equipment
Return Instructions
We're committed to bringing you the best in video entertainment every day. Your
replacement Genie Mini is enclosed. Here's how to connect and activate it, plus how to
return your non-working equipment.
To avoid non-return fees, follow important return instructions at the end of this document.
1 2
Connect Reset
1 Connect your replacement Genie Mini
·
Carefully stack your replacement Genie Mini on top of your non-working Genie Mini.
·
Transfer one connection at a time from the non-working Genie Mini to the replacement
Genie Mini, except for the power cord. Need help? Go to
·
Plug the power cord into the replacement Genie Mini, then into a power outlet. If the
receiver doesn't automatically power up, press the POWER button.
·
Turn on your TV.
2 Reset your remote
·
On the remote, press and hold MUTE and SELECT.
·
The GREEN LED will blink twice.
·
Press 9-8-7 on your remote.
·
The GREEN LED will blink four times if successful.
3 Setup
·
Select REPLACE A LOCATION, choose the Client you want to remove and select
REPLACE.
·
Select YES, REPLACE to confirm your choice.
Note: The new Genie Mini may display a flashing red LED and the screen may flash gray
intermittently during this setup step.
3 4 5
Setup Activate Program
att.com/equipmentinstall
Genie Mini with Genie Mini 2
6
Return
1
2
3
Instructions can be found online at
att.com/equipmentinstall or by
scanning the QR code.
(Continued on back)
1
Q
1