AT&T Genie Mini Activation Instructions

Activation & Equipment
Return Instructions
We're committed to bringing you the best in video entertainment every day. Your
replacement Wireless Genie Mini is enclosed. Here's how to connect and activate it, plus
how to return your non-working equipment.
To avoid non-return fees, follow important return instructions at the end of this document.
1 2
Connect Reset
1
Connect your replacement Wireless Genie Mini
·
Carefully stack your replacement Wireless Genie Mini on top of your non-working
Wireless Genie Mini.
·
Transfer one connection at a time from the non-working receiver to the replacement
receiver, except for the power cord. Need help? Go to
·
Plug the power cord into the replacement Genie Mini, then into a power outlet. If the
receiver doesn't automatically power up, press the POWER button.
·
Turn on your TV. The CONNECTING TO VIDEO BRIDGE screen will appear.
2 Reset your remote
·
On the remote, press and hold MUTE and SELECT.
·
The GREEN LED will blink twice.
·
Press 9-8-7 on your remote.
·
The GREEN LED will blink four times if successful.
3 Setup
Go to the Genie 2 server.
·
Press and release the ADD CLIENT button on top of your server. The button will start
flashing GREEN.
Note: The ADD CLIENT button will time out in 20 mins. If you need more time, press it again.
Go back to your replacement Wireless Genie Mini connected to a TV:
·
You should see the CONNECT TO VIDEO BRIDGE screen.
·
If the signal quality is good or excellent, select CONNECT NOW; otherwise, try moving the
client closer to the Genie 2 server or call Customer Care at 800.531.5000.
·
Select REPLACE A LOCATION, then choose the Client you want to remove, and select
REPLACE. Confirm your choice by selecting YES, REPLACE.
·
Note: The new Genie Mini may display a flashing red LED and the screen may flash gray
intermittently during this setup step.
·
The guided setup is complete. Select WATCH TV.
3 4 5
Setup Activate Program
att.com/equipmentinstall
Wireless Genie Mini with Genie 2
6
Return
2
3
4
Instructions can be found online at
att.com/equipmentinstall or by
scanning the QR code.
1
(Continued on back)
1
R
1