Deduct these resistance values from the available external static pressures shown in the respective Blower Performance Table. (See Note 2 for exception.)
2
Since the resistance to air flow will be less for horizontal duct connections than for bottom duct connections, add these pressures to the ESP values on the
respective unit's blower performance table.
TABLE 9 - POWER EXHAUST PERFORMANCE
MOTOR
SPEED
CFM
HIGH*
5250
MEDIUM
4900
LOW
4400
*
Factory Setting
Power Exhaust motor is a 3/4 HP , PSC type with sleeve bearings, a 48 frame and inherent protection.
TABLE 10 - BLOWER MOTOR AND DRIVE DATA
BLOWER
MODEL
DRIVE
RANGE
SIZE
(RPM)
HP FRAME
Stan-
850/1065
dard
15 TON
High
Speed
965/1190
Access
Stan-
870/1025
dard
20 TON
7.5
High
Speed
950/1120
Access
1
All motors have a nominal speed of 1800 RPM, a 1.15 service factor and a solid base. They can operate to the limit of their service factor because they are located in the moving air, upstream