Presetting Stations; Tuning In To A Preset Station; For Better Reception - Hitachi AXM845E Instruction Manual

Presetting Stations

The unit's memory can store a total of 30 FM stations. Presetting allows you to tune in to a
station directly.
Tune in to a desired station and then press the ID3/MEM/C-ADJ. button. The preset
1.
number will flash and the "MEMORY" indicator will show on the display.
Press the PRESET/FOLDER/ARROW
2.
preset number.
GB
3. Press the ID3/MEM/C-ADJ. button on the remote control again to store it in the
memory.
4. Repeat steps 1-3 to store other stations.
• Storing a new station into a preset location will erase the previously stored station in that location.
• Power off will not erase the memory of preset stations. Perform the stations presetting procedures
again to store the stations.
• To erase all preset memory, tap and hold the
on the remote control in STANDBY mode. The standby LED and LCD will flash once.
• There are some preset stations in default setting, you can overwrite them anytime you want.

Tuning in to a Preset Station

Press the PRESET/FOLDER/ARROW
number.

For Better Reception

Fully unwind the FM aerial. Extend the FM aerial and place it in the position that
sounds best.
Do not connect the FM aerial to an outside aerial.
28
buttons on the remote control to select the
icon on the unit or press and hold the
buttons on the remote control to select a preset
button