Hitachi AXM846E Quick Start Manual

Quick Start Guide
AXM846E
MICRO HI-FI SYSTEM with
docking for ipad/ iphone/ ipod
Thank you
for purchasing your new Hitachi Micro HI-FI
SYSTEM with docking for ipad/ iphone/ ipod.
Please follow this quick start guide for a successful rst
time set up.
We recommend that you spend some time reading this
instruction manual in order to fully understand all the
operational features it o ers.
Read all the safety instructions carefully before use and
keep this instruction manual for future reference.
GB
1 1
S S
Unpacking
tep tep
Remove all packaging from the unit. Retain the packaging. If you
dispose of it please do so according to any local regulations.
The following items are included:
The Main Unit Speakers Remote Control
_ _ VOLUME VOLUME + +
iR
Mains Cable FM Aerial
Instruction Manual Quick Start Guide
2 2
S S
Operating Your Remote Control
tep tep
The remote control requires two AAA size batteries (not included).
1. Press and slide the back cover to open the battery compart-
ment of the remote control.
1 2 3
4 5 6 0
7 8 9 PROG
TU– TU+ PRESET – +
POP JAZZ BASS ROCK CLASSIC
FLAT – + MUTE
VOL
MENU REPEAT
ENTER
DISPLAY SHUFFLE
DISC USB DOCK TUNER
AUX CLOCK TIMER SLEEP
INTRO RDS DIM – DIM +
2. Insert two AAA size batterues.
Make sure the (+) and (-) ends of the batteries match the (+) and
(-) ends indicated in the battery compartment.
3. Close the battery compartment cover.
3 3
S S
Connecting the Speakers
tep tep
Connect the speaker cables at the back of the speakers to the Speaker
Out (L/R) sockets at the rear of the unit.
R SPEAKER OUT L
R AUX IN L FM ANT
AC~
5 5
S S
Clock Setting
tep tep
Auto Setting the Clock
In FM mode, press the RDS button repeatedly until RDS CLOCKS
shows on the display. Once RDS CLOCKS has selected, clock will
automatically update.
Manually Setting the Clock
Press the STANDBY button on the unit or the remote control to
switch the unit back to STANDBY mode.
1. In STANDBY mode, press and hold the CLOCK button on the
remote control until the hour digits are ashing.
2. Press the buttons on the remote
control to adjust the hour digits while
ashing, then press the ENTER or
CLOCK buttons on the remote control
to con rm, then the minute digits will
1 2 3
4 5 6 0
ash. 7 8 9 PROG
PRESET
– +
TU– TU+
3. Press the buttons to adjust the
POP JAZZ ROCK CLASSIC
BASS
– +
FLAT MUTE
minute digits while ashing, then press
VOL
ENTER
the ENTER or CLOCK buttons on the
MENU REPEAT
remote control to con rm. The clock
ENTER
DISPLAY SHUFFLE
setting is now complete.
DISC USB DOCK TUNER
AUX CLOCK TIMER SLEEP
CLOCK INTRO RDS DIM – DIM +
T T
Well done, your new Micro HiFi System is now ready to use.
ip: ip:
You will nd that there are many exciting features available. To get to know all these features, please take some time to
read the Instruction Manual provided with your Micro HiFi System.
4 4
S S
Power On
tep tep
To the Mains
R SPEAKER OUT L R AUX IN L ANTENNA FM socket
AC~
main unit
Ensure all the cables to the main unit are disconnected before installing or
removing the base stand.
This unit is designed to operate with an AC 230V ~50Hz power supply.
Connecting to the Mains Socket
Connect the mains cable at the rear of the
1 2 3
main unit to the mains socket.
4 5 6 0
7 8 9 PROG
PRESET
TU– TU+ – +
POP JAZZ ROCK CLASSIC
Switching the Unit ON BASS
– +
FLAT MUTE
Press the STANDBY button on the unit or
VOL
MENU REPEAT
the remote control to switch the unit on.
ENTER
DISPLAY SHUFFLE
DISC USB DOCK TUNER
AUX CLOCK TIMER SLEEP
INTRO RDS DIM – DIM +
6 6
S S
Basic Operation
tep tep
Selecting Modes
icon repeatedly on the unit to switch between USB, TUNER,
Tap the
DOCK, AUX and DISC modes. Alternatively press the USB, TUNER,
DOCK, AUX or DISC buttons on the remote control to select desired
mode.
USB TUNER DOCK
AUX DISC
1 2 3
4 5 6 0
7 8 9 PROG
PRESET
TU– TU+ – +
POP JAZZ ROCK
CLASSIC
BASS
FLAT – + MUTE
VOL
MENU REPEAT
ENTER
DISC USB DOCK TUNER
DISPLAY SHUFFLE
AUX
DISC USB DOCK TUNER
AUX CLOCK TIMER SLEEP
INTRO RDS DIM – DIM +
QSG-AXM846E-120822V2