Storing Stations; Recalling A Stored Station - Hitachi AXM920E Instruction Manual

Storing Stations

You can store up to 30 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like
to save, press and hold the ID3/MEM/C-ADJ. button on the remote control. The
"Preset Empty #" will show on the display and the preset number will flash.
Press the SKIP/TUNE SEARCH
2.
GB
select your desired preset station number and then press the ID3/MEM/C-ADJ. button
on the remote control to confirm.
The station will be stored and the screen will then show "Preset # Stored".
3.

Recalling a Stored Station

1. Once you have saved a station to the preset memory, you can recall it by pressing the
ID3/MEM/C-ADJ. button on the remote control.
Press the SKIP/TUNE SEARCH
2.
select your desired preset station number.
Press the ID3/MEM/C-ADJ. button on the remote control to confirm the selection.
3.
• The stored stations will be saved into the memory and power off will not erase it. Storing a new
station into a preset location will erase the previously stored station in that location
• While the unit is in Standby mode, tap and hold the /MENU/INFO icon on the unit or press and
hold the /MENU/INFO on the remote control to erase all preset memory and restore to factory
setting.
20
buttons on the unit or the remote control to
buttons on the unit or the remote control to