Yamaha YP250A 1999 Supplementary Service Manual page 75

ANTI-LOCK BRAKE SYSTEM (ABS)
2. Install:
S Sensor housing
3. Install:
S Front wheel
NOTE:
Align the slot of sensor housing with the projection
part of front fork, then assemble them.
CAUTION:
Install after checking if foreign materials are
mixed in the wheel hub. If foreign materials are
mixed, it causes to damage the inner sensor
rotor and wheel sensor.
5. Install:
S Front wheel sensor 1
S Brake caliper 2
S Clamp 3
NOTE:
When installing the wheel sensor, check if the
wheel sensor lead is twisted or foreign matters at-
tached to the electrode.
CAUTION:
To route the front wheel sensor lead, refer to
the CABLE ROUTING.
67
CHAS
23 Nm (2.3 mSkg)
35 Nm (3.5 mSkg)