Monitoring - Aiphone GT-DMB-N Operation Manual

GUARD STATION
6

MONITORING

You can monitor an entrance station or door station.
*
When monitoring an entrance station or door station with a
camera, you can view the video at the station and hear the sound.
*
The monitoring function is not available for an entrance station or
door station without a camera.
Monitoring from a tenant building
*
For monitoring a door station, start from step
1
In standby mode, press
The search item list is displayed.
2
Select "ENTRANCE" by pressing
ENTRANCE
ZOOM
ADJUS
WIDE
3
Press ( ) or
The entrance station list is displayed.
4
Select the target entrance station by pressing
ZOOM ZOOM ZOOM
or .
WIDE WIDE WIDE
Selected entrance station number and name
ZOOM
ADJUST
WIDE
Entrance station numbers and names are
displayed in alphabetical or numerical order.
* The arranging method differs depending on
the setting.
ZOOM
ZOOM
*
Press or to turn the page of the list.
WIDE
WIDE
*
The list is displayed in order of either station number or name.
5
.
( ).
ZOOM
ADJUST
WIDE
ZOOM ZOOM ZOOM
or
WIDE WIDE WIDE
UNIT BY NUMBER
UNIT BY NAME
GUARD STATION
ENTRANCE
ZOOM ZOOM
.
WIDE WIDE
0001
ENTRANCE1
1 / 1
0001 ENTRANCE1
0002 ENTRANCE2
0003 ENTRANCE3
0004 ENTRANCE4
0005 ENTRANCE5
5
Press
The sound at the station is heard, and the video is displayed on the screen.
*
While monitoring, you can switch zoom/wide, pan & tilt, and
adjust the screen view. (→ 5-4 )
6
[To communicate with the station]
Press
.
ZOOM
WIDE
Communication with the station starts and "
*
Until this step, the monitored stations cannot hear any sound
from the guard station.
7
To end monitoring or communication,
Press
NOTES:
• Monitoring ends automatically after about 30 seconds.
• Only entrance stations that can be selected by the guard station
can be monitored.
• When no door station is installed, pressing
effect on the display.
- 43 -
.
Selected station number and name
1011
PARKING GATE
or lift handset.
ADJUST
or
" is displayed.
or hang up handset.
has no