Calling The Other Party - Aiphone Tenant IXG Series Operation Manual

3
How to use

Calling the other party

Place a call using call button to one of the following units or stations.
• Guard Unit
• Common Area
• Commercial Unit
• Another Tenant Station that is registered in the same unit
• Mobile Apps that is registered in the same unit.
Call will be placed to all the registered Mobile Apps if multiple Mobile Apps are registered within the same residential
unit. It communicates with the first Mobile App that responds.
1.
Tap [CALL] on the Home Screen.
2.
Tap the call destination.
• The call will be placed to the selected party.
• The ringback tone is heard.
Placing a call
3.
Speak when the other party
answers.
• Video may not be displayed depending on the
destination station. The "When receiving a call
from an audio station" screen in section
"Operation Screen (→page 16)"
• Refer to "Buttons (→page 11)"
operations available during a call.
4.
Tap
Note
• The call timeout may differ depending on the settings.
• If a page with a higher priority is received from another
station while making an outgoing call or during
communication, the outgoing call or call will be interrupted
and the station will switch to the page.
• If the call continues for approximately three minutes, the
communication will automatically end. A notification sound
will play approximately 10 seconds before ending.
• The call duration cannot be extended on the station. If the
communication is extended on the destination station, the
call duration will be extended by approximately 10 minutes.
• The call priority is "Normal."
18
is displayed.
for the
to end communication.