Calling The Guard Unit - Aiphone Tenant IXG Series Operation Manual

3
How to use

Calling the Guard Unit

The registered Guard Unit can be called by using the guard button.
Depending on the settings of this station,
1.
Tap on the Home Screen.
• The ringback tone will be played.
2.
Speak with the other party.
• Refer to "Buttons (→page 11)"
operations available during a call.
3.
Tap
for the
to end communication.
Placing a call
may not be displayed. In this case, it cannot be used.
Note
• The call timeout may differ depending on the settings.
• If a page with a higher priority is received from another
station while making an outgoing call or during
communication, the outgoing call or call will be interrupted
and the station will switch to the page.
• If the call continues for approximately three minutes, the
communication will automatically end. A notification sound
will play approximately 10 seconds before ending.
• The call duration cannot be extended on this station. If the
communication is extended on the destination station, the
call duration will be extended approximately 10 minutes.
• The call priority is "Normal."
19