Main Menu
uuIndicatorsu
Indicator
Name
SH-AWD® (Super
Handling-All
Wheel Drive
TM
)
Indicator
BSI (Blind Spot
Information)
Indicator
76
Table of contents
On/Blinking
Comes on for a few seconds when
●
you set the power mode to ON, then
goes off.
Comes on if there is a problem with
●
the SH-AWD® system.
Blinks when the differential
●
temperature is too high.
Comes on for a few seconds when
●
you change the power mode to ON,
then goes off.
Stays on while BSI is turned off.
●
Comes on when mud, snow, or ice
●
accumulates in the vicinity of sensor.
Comes on if there is a problem with
●
the system.
Explanation
Stays on constantly –the engine
●
drives the front wheels only in this state.
Have the vehicle checked by a dealer.
Blinks while driving – Stop in a safe
●
place, shift to P, and idle the engine
until the indicator goes off. If the
indicator does not stop blinking, take
your vehicle to a dealer.
2 SH-AWD® (Super Handling-All
Wheel Drive
TM
) P. 204
—
Comes on while driving - Remove
●
the obstacle in the vicinity of sensor.
Comes on while driving - Have the
●
vehicle checked by a dealer.
Message