Main Menu
uuIf a Tire Goes FlatuChanging a Flat Tire
■
Getting Ready to Replace the Flat Tire
Handle
Tool Case
Spare Tire
Cover
278
Table of contents
1. Push the rear edge of the handle on the
front cargo floor lid and open the lid.
2. Take the jack, extension bar, and wheel nut
wrench out of the tool case.
3. Remove the cover on the cargo area lining
to access the shaft for the spare tire hoist.
1Changing a Flat Tire
NOTICE
Do not use the jack if it doesn't work properly. Call a
dealer or a professional towing service.
The subwoofer, a large black enclosure, is located on
the right side under the lid. Do not store anything in
this area. Doing so may compromise vehicle audio
performance.