Acura ZDX 2013 Online Reference Owner's Manual page 141

Main Menu
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
■
Storing a Position in Memory
Memory Button 1
Memory Button 2
Set Button
■
Recalling the Stored Position
Memory Buttons
140
Table of contents
1. Adjust the driver's seat, the steering wheel
and the outside mirrors to the desired
position, and turn the power mode to ON.
2. Press the SET button.
u
You will hear the beeper, and the
memory button indicator light will blink.
( 1 or ( 2 within five
3. Press memory button
seconds of pressing the SET button.
u
Once the seat, the steering wheel and
the outside mirror positions have been
memorized, the indicator light on the
button you pressed stays on.
P . (
1. Move the shift lever to
( 1 or
2. Press a memory button (
u
You will hear the beeper, and the
indicator light will blink.
The seat, the steering wheel and the outside
mirrors will automatically move to the
memorized positions. When it has finished
moving, you will hear the beeper, and the
indicator light stays on.
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat, the steering wheel or the
outside mirror position before the double-beep.
•
You set the power mode to any position except
ON.
1Recalling the Stored Position
The seat will stop moving if you:
•
Press the SET button, or a memory button (
( 2 ).
( 2
).
•
Adjust the seat, the steering wheel or the outside
mirror position.
•
Shift into any position except
1 (
or
( P
.