Access Point - EnGenius EnStation5-ACv2 User Manual

Before starting to configure this Access Point, you may realize the used scenario under varied operating modes.ETD series
product is builded in EnGenius EnJet solution, AP can transmit data more efficiently, avoid collisions,and reduce latency
and packet losses. It can be configured as an: Access Point, Client Bridge or WDS (AP & Station) when EnJet enable, or
Access Point, Client Bridge or WDS (AP, Station & Bridge) when EnJet disable. This chapter describes purpose of different
operating modes and lists down the operating modes for outdoor Access Points or Client Premise Equipments (CPE).
Access Point Mode
In Access Point Mode, AP/CPE behaves likes a central connection for stations or clients that support IEEE 802.11a/b/g/n
networks. The stations and clients must be configured to use the same SSID (Service Set Identifier) and security password to
27