Yamaha RX-V459 Owner's Manual page 30

BASIC SETUP
9
Press j / i to select the desired setting.
A/B/C/D/E
CHECK OK? .. YES
Choices: YES, NO
• Select "YES" to complete the setup procedure if
the test tone levels from each speaker were
satisfactory.
• Select "NO" to proceed to the speaker level
adjustment menu to balance the output level of
each speaker.
10
Press ENTER to confirm your selection.
A/B/C/D/E
• If you selected "YES" in step 9, the setup
procedure is completed and the display returns to
the top "SET MENU" display.
• If you selected "NO" in step 9, the front speaker
level adjustment display appears in the front panel
display.
28
ENTER
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
PRESET/CH
11
Press d / u to select a speaker and then j / i
to adjust the balance.
The selected speaker and the front left speaker (or the
surround left speaker) output a test tone in turn.
• Press i to increase the value.
• Press j to decrease the value.
ENTER
A/B/C/D/E A/B/C/D/E
PRESET/CH
FR ----||----
• Select "FR" to adjust the balance between the front
left and right speakers.
• Select "C" to adjust the balance between the front
left and center speakers.
• Select "SL" to adjust the balance between the front
left and surround left speakers.
• Select "SB" to adjust the balance between the
surround left and surround back speakers.
• Select "SR" to adjust the balance between the
surround left and surround right speakers.
• Select "SWFR" to adjust the balance between the
front left speaker and the subwoofer.
12
Press SET MENU to exit from "BASIC
SETUP".
SRCH MODE
ENTER
A/B/C/D/E A/B/C/D/E
PRESET/CH
SET MENU
MENU