Yamaha RX-V393 Owner's Manual page 38

Yamaha natural sound av receiver owner's manual
Table of Contents

Advertisement

Adjustment of DELAY TIME
You can adjust the time difference between the beginning of
the sound from the main speakers and the beginning of the
effect sound from the rear speakers.
The larger the value, the later the effect sound is generated.
This adjustment can be made to all programs individually.
PRO LOGIC
: from 15 to 30 milliseconds
PRO LOGIC
: from 15 to 30 milliseconds
ENHANCED
CONCERT VIDEO
: from 1 to 100 milliseconds
MONO MOVIE
: from 1 to 100 milliseconds
STADIUM
: from 1 to 50 milliseconds
DISCO
: from 1 to 100 milliseconds
ROCK CONCERT
: from 1 to 100 milliseconds
CONCERT HALL
: from 1 to 100 milliseconds
Notes
RX-V493 only
The values of the delay time, center level, rear level and
subwoofer output level you set the last time will remain
memorized even when this unit is in the standby mode.
However, if the power cord is kept disconnected for more than
one week, these values will be automatically changed back to
the original factory settings.
36
(Preset value: 20 milliseconds)
(Preset value: 20 milliseconds)
(Preset value: 28 milliseconds)
(Preset value: 20 milliseconds)
(Preset value: 45 milliseconds)
(Preset value: 14 milliseconds)
(Preset value: 17 milliseconds)
(Preset value: 30 milliseconds)
RX-V493
1
Press once or more so that "DELAY" appears on the
display.
DELAY/CENTER
/REAR/SWFR
2
By continuously pressing the "+" or "–" side of the
TIME/LEVEL button, the value changes continuously.
The value stops changing momentarily at the preset point.
TIME/LEVEL
Notes
When the TIME/LEVEL button is pressed, sound is
momentarily interrupted.
Adding too much delay will cause an unnatural effect with
some sources.
RX-V393
This adjustment can be made by only using the remote control
transmitter.
DELAY TIME
Notes
When the DELAY TIME key is pressed, sound is
momentarily interrupted.
Adding too much delay will cause an unnatural effect with
some sources.
RX-V393 only
The value of the delay time you set the last time will remain
memorized even when this unit is in the standby mode.
However, if the power cord is kept disconnected for more than
one week, these values will be automatically changed back to
the original factory settings.
ms
ms
Adjustable
ms
Adjustable

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-v493

Table of Contents