Yamaha RX-V393 Owner's Manual page 12

Connecting with a Dolby Digital (AC-3) Decoder
If you have a Dolby Digital (AC-3) Decoder unit or an LD player etc. which incorporates a Dolby Digital (AC-3) Decoder, its discrete
outputs can be connected to this unit.
RX-V493
FM
ANT
GND
AM
ANT
Notes for RX-V493
•
The laserdisc player (or another unit) must be also
connected to the DVD/LD (or TV/DBS) AUDIO SIGNAL input
terminals of this unit for playing a source with the Dolby Pro
Logic Surround decoded or in normal stereo (or monaural).
•
The discrete signals input to this unit cannot be recorded by
a tape deck, MD recorder or VCR. To record a source played
on the laserdisc player (or another unit), it must be
connected to the DVD/LD (or TV/DBS) AUDIO/VIDEO
SIGNAL input terminals of this unit.
10
6CH DISCRETE OUTPUT
MAIN CENTER SURROUND
SUB
WOOFER
DVD/LD
TV/DBS
75
R L R SURROUND
UNBAL. MAIN
GND
MONITOR OUT DVD/LD
IN
PHONO TAPE TAPE REC DVD/LD IN
PB /MD OUT
3 4
AUDIO SIGNAL
6CH
DISCRETE
INPUT
SUB
L CENTER
WOOFER
VIDEO
SIGNAL
TV/DBS
VCR OUT
VCR OUT TV/DBS
1
CD
VIDEO OUT
AUDIO OUT
•
If you made no connection to the SUBWOOFER input
terminal of this unit or you will not use a subwoofer, you
should make a setting for distributing signals at the LFE
channel to the right and left MAIN output terminals on the
Dolby Digital (AC-3) Decoder unit.
For details, refer to the owner's manual for the Dolby Digital
(AC-3) Decoder unit.
Dolby Digital (AC-3) Decoder unit
DIGITAL
IN
DIGITAL
OUT
RF Demodulator
AC-3 RF
IN
AC-3 RF
OUT
Laserdisc player with AC-3 RF output or
another unit with AC-3 RF output