Chaining Rule - Siemens SINUMERIK 840D sl Programming Manual

Tool offsets
5.5 Tool types
5.5.7

Chaining rule

The geometry tool length compensations, wear and base dimension can be chained for both
the left and the right tool nose radius compensation, i.e. if the tool length compensations are
changed for the left cutting edge, then the values are also automatically entered for the right
cutting edge and vice versa.
References
Function Manual, Extended Functions; Grinding (W4)
78
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
Fundamentals