Siemens SINUMERIK 840D sl Programming Manual page 547

25. Synchronous spindle
Keyword / 1st para-
subroutine meter
identifier
COUPDEF AXIS:
Follow-
ing axis
or
following
spindle
(FS)
COUPDEL AXIS:
Follow-
ing axis
or
following
spindle
(FS)
COUPOF AXIS:
Follow-
ing axis
or
following
spindle
(FS)
COUPOF AXIS:
Follow-
ing axis
or
following
spindle
(FS)
COUPOF AXIS:
Follow-
ing axis
or
following
spindle
(FS)
Fundamentals
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
2nd 3rd para- 4th para-
para- meter meter
meter
AXIS: REAL: REAL:
Lead- Numera- Denomi-
ing axis tor nator
or transfor- transfor-
leading mation mation
spindle ratio ratio (LA)
(LS) (FA) or or (LS)
(FS)
AXIS:
Lead-
ing axis
or
leading
spindle
(LS)
AXIS:
Lead-
ing axis
or
leading
spindle
(LS)
AXIS: REAL:
Lead- POS
FS
ing axis
or
leading
spindle
(LS)
AXIS: REAL: REAL:
Lead- POS POS
FS LS
ing axis
or
leading
spindle
(LS)
5th parameter
Block change behavior
STRING[8]: Block change behavior:
"NOC": No block change control,
block change is enabled
immediately, "FINE": Block change
on "synchronism fine", "COARSE":
Block change on synchronism
coarse and "IPOSTOP": block
change in setpoint-dependent
termination of overlaid movement. If
the block change behavior is not
specified, the set behavior is
applicable and there is no change.
The block change is enabled
immediately.
Block change is not enabled until
this position has been crossed.
Block change is not enabled until
both programmed positions have
been crossed. Range of
POS , POS : 0 ... 359.999
FS LS
degrees.
16.5 Predefined subroutine calls
6th para- Explanation
meter
STRING[2]: Couple
"DV": definition:
Setpoint Definition of
coupling synchro-
"AV": nized spindle
Actual- grouping.
value
coupling
Couple
delete:
Delete
synchro-
nized spindle
grouping.
Fastest
possible
deactivation
of synchro-
nous
operation.
Deselection
of synchro-
nous
operation
after deacti-
vation
position
POS
been
crossed.
Deselection
of synchro-
nous
operation
after the two
deactivation
positions.
POS
POS
been
crossed.
Tables
has
FS
and
FS
have
LS
547