Example 2: Nc Program For Turning - Siemens SINUMERIK 840D sl Programming Manual

Creating an NC program
3.4 Program examples
3.4.2

Example 2: NC program for turning

Program example 2 is intended for the machining of a workpiece on a lathe. It contains radius
programming and tool radius compensation.
Note
In order that the program can run on the machine, the machine data must have been set
appropriately ( → machine manufacturer!).
Dimension drawing of the workpiece
Figure 3-1
50
Top view
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
Fundamentals