Preset Tuning - Yamaha RX-V2095 Owner's Manual

BASIC OPERATION

Preset tuning

Manual preset tuning
This unit can store station frequencies selected by the tuning operation. With this function, you can recall any desired station only by
selecting the preset station number. Up to 40 stations (8 stations x 5 groups) can be stored.
To store stations
1
Tune to a station.
(Refer to the previous page for the tuning procedure.)
2
MEMORY
MAN'L/AUTO FM
3
Select a group (A – E) of preset stations before the
"MEMORY" indicator goes off. The group will appear on
the display.
A/B/C/D/E
4
Select a preset station number (1 to 8) where you want
to program the station before the "MEMORY" indicator
goes off.
Press the side to select a higher preset station
number.
Press the side to select a lower preset station
number.
44
NATURAL SOUND AV RECEIVER RX V2095
STANDBY/ON
SPEAKERS
A B PROGRAM
PHONES BASS TONE
EXTENSION BYPASS
MEMORY
Flashes on and off
for about 5 seconds.
SPEAKERS
A
PRESET STATIONS
TUNING
CINEMA DSP 7ch
INPUT SELECTOR
INPUT MODE
PRESET STATIONS
A/B/C/D/E TUNING
EFFECT EXT. DECODER
PRESET/TUNING FM/AM MEMORY TUNING MODE
EDIT MAN'L/AUTO FM AUTO/MAN'L MONO
BASS TREBLE BALANCE REC OUT/ZONE 2
0 0 0 SOURCE/REMOTE VIDEO AUX
l l l l l l
DVD/LD TAPE/MD
2 2 2 2
2 2 TV/DBS CD
3 3 3 3 3 3 VCR 1 TUNER
4 4 4 4 4 4 VCR 2 PHONO
5 5 5 5 L 5 5 R VIDEO AUX
3 4
5
Press the MEMORY button before the "MEMORY"
indicator goes off.
SPEAKERS
A
Shows the displayed station has been
programmed to A-1.
* In the same way, program other stations to A-2, A-3 ... A-8.
* You can program more stations to preset station numbers
on other groups in the same way by selecting other
groups in step 3.
Notes
•
A new setting can be programmed in place of the former
one.
•
For presets, the setting of the reception mode (stereo or
monaural) is stored along with the station frequency.
Memory back-up
The memory back-up circuit prevents the programmed data
from being lost even if this unit is set to the standby mode or
the power plug is disconnected from the AC outlet or the
power is cut due to a temporary power failure. If, however, the
power is cut for about two weeks, the memory may be
deleted. If so, it can be re-programmed by simply following
the Preset tuning steps.
VOLUME
l6
20 l2
28 8
4
40
60 2
0
–dB
2, 5
MEMORY
MAN'L/AUTO FM
STEREO AUTO
DVD/LD TAPE/MD
TV/DBS CD
VCR 1 TUNER
VCR 2 PHONO
V-AUX