Remote Control In Zone 2 - Yamaha RX-V1000 Owner's Manual

ZONE 2
Special considerations when
using DTS software
The DTS signal is a digital bitstream. Therefore, if you
attempt to send the DTS signal to the second room, you
will only be able to hear the digital noise sound that could
damage your speakers.
Due to this characteristic of DTS encoded discs, the
following considerations and adjustments need to be
made.
For LDs or DVDs encoded with DTS
Only 2-channel analog audio signals may be sent to the
second room, as follows:
• LDs
Set your LD player's left and right outputs to the
analog soundtrack.
• DVDs
Use the disc menu to set the DVD player's mixed 2-
channel left and right audio outputs to the PCM or
Dolby Digital soundtrack.
For CDs encoded with DTS
DO NOT USE the Zone 2 feature for CDs encoded with
DTS.

Remote Control in Zone 2

In the second room (Zone 2), the supplied remote control
can be used for the Zone 2 remote control. You can select
the input source and control the component which is
located in the main room directly from the second room
regardless of the listening condition in the main room.
Before starting the following procedure, set REC OUT/
ZONE 2 on the front panel to SOURCE/REMOTE.
1
Repeat steps 1 and 2 of the procedure in
"Setting the Manufacturer Code" on page 54.
2
Press l / h to select "L:AMP".
TITLE
ENTER
SOURCE
DISPLAY MENU
SELECT SEARCH – CHAPTER
POWER REC STOP PAUSE
/
3
Press k / n to select "Zone2".
TITLE
ENTER
SOURCE
DISPLAY MENU
SELECT SEARCH – CHAPTER
POWER REC STOP PAUSE
/
62
6CH INPUT
SOUND
+
PLAY
6CH INPUT
SOUND
+
PLAY
4
Press LEARN to complete the Zone 2 setup.
LEARN
5
Press SOURCE SELECT k to display
"Zone2" in the display window.
SOURCE
SELECT
6
Press an input selector button to select the
input source you want to listen to in the
second room.
The display window shows "2: name of selected
input" if the remote control is in the Zone 2 mode.
SYSTEM
POWER STANDBY
V-AUX TUNER
D-TV/LD CBL/SAT
7
You can control the component by using the
component control area buttons.
TITLE
SOURCE
DISPLAY MENU
SELECT SEARCH
POWER REC STOP
/
10KEY DSP HALL 1 HALL 2
1
ROCK
CONCERT STADIUM
5
MONO MOVIE
6.1/ES MOVIE THEATER 1
9 10
CHP/INDEX
A / B / C / D / E PRESET
+ +
TV INPUT
TV VOL CH
TV MUTE
– –
DISC
Note
• Adjust the Zone 2 volume with the control on the amplifier in
the second room.
8
Press SOURCE SELECT k / n to exit from
the Zone 2 mode.
SELECT
PHONO
MD/TAPE CD-R CD
VCR 1 VCR 2/DVR DVD
6CH INPUT
ENTER
SOUND
– CHAPTER +
PAUSE PLAY
CHURCH JAZZ CLUB
2 3 4
ENTER- TV
TAINMENT SPORTS
6 7 8
MOVIE /DTS
THEATER 2 SUR.
11 12
0 +10 +100
+
MUTE
VOLUME
EFFECT
–
SOURCE