Presetting Stations - Yamaha RX-V1000 Owner's Manual

TUNING

Presetting Stations

Automatically presetting stations
(for FM stations)
You can use the automatic preset tuning feature to store
FM stations. This function enables the unit to
automatically tune in to FM stations with strong signals,
and to store up to 40 (8 stations x 5 groups) of those
stations in order. This feature enables you to easily tune in
to any preset station by selecting the preset station
number (see page 33).
STANDBY
/ON
PRESET/
SOURCE
/REMOTE A/B/C/D/E TUNING
DVD MD/TAPE
D-TV/LD CD-R
SPEAKERS BASS PROCESSOR
CBL/SAT TUNER
A B EXTENSION DIRECT
VCR 1
CD
EFFECT PROGRAM
VCR2
/DVR PHONO
ON OFF
V-AUX
REC OUT/ZONE 2
1
Press FM/AM to select the FM band.
FM/AM
2
Press TUNING MODE (AUTO/MAN'L MONO)
so that the "AUTO" indicator lights up on the
front panel display.
TUNING
MODE
AUTO/MAN'L MONO
3
Press and hold MEMORY (MAN'L/AUTO FM)
for more than 3 seconds.
The preset number, the "MEMORY" and "AUTO"
indicators flash. Then, after about 5 seconds,
automatic preset tuning begins from the frequency
currently displayed toward the higher frequencies.
MEMORY
MAN'L/AUTO FM
When automatic preset tuning is completed, the
front panel display shows the frequency of the last
preset station.
32
INPUT
VOLUME
INPUT MODE
D I G I T A L
D I G I T A L
SURROUND
PRESET TUNING
/TUNING FM/AM MEMORY MODE BASS TREBLE
EDIT MAN'L/AUTO FM AUTO/MAN'L MONO
PHONES S VIDEO VIDEO L AUDIO R OPTICAL
+
– –
SILENT VIDEO AUX
1 3 2
AUTO
Lights up
PS PTY RT
VIRTUAL
DTS MOVIE THEATER 1 2 DTS MOVIE THEATER 1
PTY HOLD EON STEREO
DOLBY DIGITAL DOLBY DIGITAL
DIGITAL
NEWS INFO AFFAIRS SPORT NEWS INFO AFFAIRS SPORT
PRO LOGIC ENTERTAINMENT PRO LOGIC ENTERTAINMENT
MEMORY TUNED
PRO LOGIC
DSP
6.1/ES
SP
PCM
A B
Notes
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• You can manually replace a preset station with another FM or
AM station by simply following the procedure in the section
"Manually presetting stations" on page 33.
• If the number of the received stations does not reach E8,
automatic preset tuning has automatically stopped after
searching all stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune in to it manually
in the monaural mode, and store it by following the procedure
in "Manually presetting stations" on page 33.
6CH INPUT
Automatic preset tuning options
You can select the preset number from which the unit will
store FM stations and/or begin tuning toward lower
frequencies. Before automatic preset tuning begins (after
pressing MEMORY in step 3):
+
1. Press A/B/C/D/E and PRESET/TUNING l / h to
select the preset number under which the first station
will be stored. Automatic preset tuning will stop when
stations have all been stored up to E8.
2. Press PRESET/TUNING (EDIT) to turn off the colon
(:) and then press PRESET/TUNING l to begin
tuning toward lower frequencies.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the preset stations may be cleared. If
so, store the stations again by using the presetting
station methods.
CT
AUTO
ZO
SLE SLE