Toyotomi TRN-828ZR User Manual page 15

4 TURBO button
Under COOL or HEAT mode, press this button to turn to quick COOL or quick HEAT
mode. "
turbo function and "
super-high fan speed to cool or heat quickly so that the ambient temperature
approaches the preset temperature as soon as possible.
5 / button
• Press " " or " " button once increase or decrease set temperature 1C (°F).
Holding " " or " " button, 2s later, set temperature on remote controller will
change quickly. On releasing button after setting is finished, temperature indicator on
indoor unit will change accordingly.
• When setting TIMER ON, TIMER OFF or CLOCK, press " " or " " button to adjust time.
(Refer to CLOCK, TIMER ON, TIMER OFF buttons) When setting TIMER ON, TIMER OFF or
CLOCK, press " " or " " button to adjust time. (Refer to CLOCK, TIMER ON,
TIMER OFF buttons).
button
6
Press this button can select left & right swing angle. Fan blow angle can be selected
circularly as below:
NOTE:
•
Press this button continuously more than 2s, the main unit will swing back and forth from
left to right, and then loosen the button, the unit will stop swinging and present position
of guide louver will be kept immediately.
•
Under swing left and right mode, when the status is switched from off to
button again 2s later
within 2s, the change of swing status will also depend on the circulation sequence stated
above.
" icon is displayed on remote controller. Press this button again to exit
" icon will disappear. If start this function, the unit will run at
no display
(stops at current position)
status will switch to off status directly; if press this button again
15
, if press this
GB