Option Menu - Yamaha HTR-5840 Owner's Manual

■ Input mode
B)INPUT MODE
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn on
this unit (see page 32 for details about the input mode).
Choices: AUTO, LAST
• Select AUTO to allow this unit to automatically detect
the type of input signal and select the appropriate input
mode.
• Select LAST to set this unit to automatically select the
last input mode used for that source.
Note
Even if LAST is selected, the last setting for the EXTD SUR.
button will not be recalled.
■ Input rename
C)INPUT RENAME
Use this feature to change the name of the inputs in the
front panel display.
1
Press an input selector button to select the
input you want to change the name of.
2
Press AMP.
3
Press j / i to place the _ (under-bar) under
the space or the character you want to edit.
4
Press u / d to select the character you want,
then use j / i to move to the next space.
• You can use up to 8 characters for each input.
• Press d to change the character in the following
order, or press u to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space,
symbols (#, *, –, +, etc.)
5
Repeat steps 1 through 4 to rename each
input.
6
To exit, press SET MENU when finished.

3 OPTION MENU

Use to adjust the optional system parameters.
■ Display settings
Dimmer DIMMER
Use to adjust the brightness of the front panel display.
Choices: –4 to 0
<HTR-5850 only>
Video conversion V CONV.
Use this feature to turn on/off conversion of composite
(VIDEO) signals to S-video signals. This allows you to
output converted video signals from the S VIDEO jacks
when no S-video signals are input.
Choices: ON, OFF
• Select OFF not to convert any signals (except S-video
signals to composite signals).
• Select ON to convert composite signals to S-video
signals and component signals, and to convert S-video
signals to component signals.
• Regardless of the setting, S-video signals are always
converted to composite signals.
Note
Converted video signals are only output to the MONITOR OUT
jacks. When recording you must make the same type of video
connections (i.e., S-video) between each component.
■ Memory guard
B)MEMORY GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices: ON, OFF
Select ON to protect:
• DSP program parameters
• All SET MENU items
• All speaker levels
Note
When MEMORY GUARD is set to ON, you cannot select
any other SET MENU items.
■ Parameter initialization
Use this feature to initialize the parameters for each sound
field program within a sound field program group. When you
initialize a sound field program group, all of the parameter
values within that group revert to their initial settings.
Press the corresponding numeric button for the sound field
program that you want to initialize.
Choices: STEREO, MUSIC, ENTERTAINMENT,
MOVIE, STANDARD
Notes
• You cannot automatically revert to the previous parameter
settings once you initialize a sound field program group.
• You cannot separately initialize individual sound field programs.
• You cannot initialize any program groups when "MEMORY
GUARD" is set to ON.
SET MENU
A)DISPLAY SET
C)PARAM. INI
61